The construction or repair of an individual house is an integrated event, an important part of which is the design of the water supply. Access to the water supply for the sewage system is required at an early stage of work, so it is worth entrusting the implementation of this project to the proven general construction company, which will complete the assigned task with proper dedication. Sanitary installation - general conditions
The tap unit should be summed up to each room where access to water is required. The homeowner must also take into account the related installations, including heating and warm floors. If the house is installed by the installation of central heating, it is important to bring only cold water pipes to the boiler - the pipes of hot and cold water are summed up only from the heating device. Given the complexity of the work, the installation of the water supply system should be entrusted to a specialist. Water installation in the tee and collector system
This type of installation, given the low cost of installation and operation, is used most often. Water is evenly distributed according to individual devices, and pipes are laid from risers, which is especially beneficial in the case of two -story houses.
Installations in the collector system are placing a collector on each floor of the building, due to which plumbing plants with greater efficiency supply water to all floors. Despite the significant advantages of such a solution, many owners of single -family houses refuse to install a collector, given the excessively high costs of building a system. Projecting plumbing attitudes - you need to know about this
One of the most common investor mistakes is the choice of the cheapest consumables. The pipes in constant contact with water are more prone to corrosion and faster wear, so the structural elements should be made of solid materials and are well connected to each other.
Moreover, they should be located in such a way as to take into account the location of heating plants in the diagram and at the appropriate height. Water pipes should be installed at an altitude of 50 to 60 cm from the floor, if you need to connect the crane with the washbasin. In the case of a shower, installation is carried out at about 120-130 cm. However, to install the tank in the contact, it is enough to withstand about 60 cm in height. Ən yaxşı oyun provayderləri və ən məşhur slot maşınları Mostbet kazinosundadır Mostbet indir mobil proqramı quraşdırdıqdan sonra birbaşa telefonunuzdan istənilən oyunları oynaya və idmana mərc edə bilərsiniz.